LED Flasher Special 150 mA rated Diagnostic for use with larger draw LED indicators.
Notify me when back in stock
LED Flasher With 150mA Diagnostic Function For Use With Higher Draw Indicators.
LED indicators draw too little to use an old style incandescent suited flasher, but some indicators may have a draw too high for the LED flasher's diagnostic function to reconise a drop in load and double the flash rate when one indicator is not working.
This flasher is specifically designed to fill this gap. The diagnostic function required for ADR approval is set up with a higher threshold to recognise a drop when a set of higher draw LED indicators is being used.
- Ensures LED indicators flash at the correct rate
- Direct replacement for original flasher relay on your bike
- Works with 1 pair of Halogens and 1 pair of LED indicators, or 2 pairs of LED indicators
- Includes diagnostic circuit which doubles the flash rate if one indicator is not working, as per Australian requirements for road registration
-150mA rated diagnostic for use with high load LED indicators.
SPECIAL 150mA Diagnostic function to cater for larger draw LED indicators. The Diagnostic circuit has a higher threshold to double the flash rate when one larger draw indicator is not working.
31 = Earth
49 = Power In
49a = Power Out to indicators
Body Length is 35mm
Length including pins is 46mm
Width is 27mm
Simple. Just remove your existing flasher relay and plug in this LED flasher relay. The three pin configuration is the most commonly used. If it does not match your existing loom then a small bridging harness can easily be made to adapt it.
Be The First To Review This Product!
Help other S3 Performance Pty Ltd users shop smarter by writing reviews for products you have purchased.