LED stop tail plate light CRF250 CRF450 XR250 XR400 CRM

Clear LED stop tail numberplate lamp mudguard

This rear fender LED taillight combination is constructed from high impact plastic. It has a quality matte finish and high powered LED lights. It will bolt under your DRZ fender and offers a perfect solution to anyone looking to get a recreational registration for their dirtbike. With road reg in mind, the taillight fender also has moulded mount points for rear indicators, making for a neat fit and finish.

Installation: The lamp can fit in between the rear guard and sub-frame extension, as shown below. Depending on the sub-frame model you may need to do a little cutting of the black plastic of the lamp. If you have a motocross rear guard then it will bolt straight under the guard. Some customers have even installed it to the sub-frame using only cable ties.

Features:
* Incorporates a proper taillight (for night use) and also a stop/brake light.
* Pre-wired with connectors for easy installation
* 12 superbright red LED's under a clear lens improve the look of your bike
* 3 superbright white LED's for your numberplate
* Indicator mount points for easy installation of indicators - see other listings for matching indicators
* Low current draw
* Meets Australian Design Regulations (ADR) for motorbike stop/tail light

Dimensions
The LED lens is 85mm wide. The rear fender is 107mm wide at the widest point, and extends 115mm below the led lights.

Weight: 140g

Wiring
Green wire = Earth
Yellow wire = Tail light
Blue wire = Stop light

For 12 Volt system.
Tail: 0.02 Amps - 0.24 Watts
Stop: 0.05 Amps - 0.6 Watts
 
For 13.5 Volt system.
Tail: 0.03 Amps - 0.4 Watts
Stop: 0.08 Amps - 1.08 Watts