LED Trailer Lamp Kit, 2x LED Trailer Lamps with complete plug & play harness

In Stock

Calculate Shipping

Australian designed (down in sunny Melbourne in fact) LED Trailer Lamps with a complete Plug and Play wiring harness. Using this system, the wiring up of lamps to your trailer becomes dead easy.
The 5.5m main loom features a pre-stipped end that allows the installation of any type of trailer plug. This runs to a T-Junction at the opposite end that allows connection to the first trailer lamp and the extension harness that runs across the back of the trailer to the second lamp.
The T-Junction on the main loom features auxiliary earth and power leads for the connection of an independent licence plate lamp is required. The use of the plug and play connectors allows the lamps to be connected in mere seconds. The most time consuming part of the job will now be using all those cable ties to fix the harness to the trailer!

The LED trailer lamps used in the kit are the 641 series from ImpactLED. Their versatility allows them to be mounted on any axis and still be road legal. They are fully ADR approved and waterproof making them suitable for boat trailers.

- Multi Voltage: 12 or 24V
- Current Draw: Stop 1.2A, Tail 0.4A, Indicator 0.2A
- IP Rating: IP67 (suitable for boat trailers)
- Double insulated cable used for both the lamps and the harness
ADR approved when mounted 1 of of 4 ways!

The unique design of the lamp ensures that once installed there are no visible screw holes, they are covered by the ECE approved reflex reflector.

  • Designed in Australia
  • ADR and ECE approved
  • Impact resistant polycarbonate lens
  • Ultra low current draw
  • 100% Sealed lighting system, resistant to moisture, dirt and dust
  • Suitable for boat trailers
  • No visible screw holes
  • Stainless steel bolts and self tapping screws supplied
  • IP67 rated
  • Pre-wired with 400mm of double insulated cable
  • Double insulated cable used for both harnesses
  • 2 Year Warranty


Each lamp is 156mm x 81mm x 25mm deep
Bolt spacing 75mm
Cable length 550mm




Brand ImpactLED
Shipping Weight 1.2000kg
Unit Of Measure ea

Be The First To Review This Product!

Help other S3 Performance Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

More From This Category