Milkit 25mm Tubeless Rim Tape

Milkit 25mm Tubeless tape

YOUR STRONG AND RELIABLE TUBELESS RIM TAPE

milKit rim tape offers quick and easy conversion of your
rim to tubeless and guarantees a reliable and long-
lasting performance

• Available in the four most popular widths – covering most rim sizes
• Extra strong and reliable adhesive to ensure a tight fit on your rim
• Optimum mix of strength and flex for easy mounting
• 10m/11yd rolls – sufficient to set up 4-5 wheels

For easy and effective installation:

1. Clean rim thoroughly and ensure it is dry
2. Install rim tape by pulling it firmly into the rim. It must be tight and ensure there are no gaps or air trapped underneath
3. Make sure it overlaps at least 10 cm / 4 in over the valve hole, it’s better to have a longer overlap than shorter
4. Use two layers for high pressure wheels (above 8 bar / 120 psi)
5. Cut rim tape at a 45° angle for the best adhesion and flexibility
6. Install milKit tubeless valves into rim: pinch just a small hole into the rim tape and push valve through tape into rim