95mm tachometer 12000rpm black face digital speedo chrome alloy bezel and sleeve
Notify me when back in stock
The Acewell CA085 series of digital motorcycle speedometers combine the benefits of modern digital technology with a traditional analogue needle.
This unit comes with achrome polished body, Chrome fascia ring and black face.
All Acewell digital speedometers sold by S3 Performance are waterproof and ADR approved for street legal bikes.
Needle speedometer / rev counter options
Needle Primary scale in white print and illuminates in deep blue
Digital speedometer up to 399.9 km/h
2 trip meters TRIP 1 + 2
Odometer (Total mileage)
Digital tachometer display to 19,900 RPM
Display average and maximum speeds
Display maximum RPM
Digital Temperature gauge and max temperature display (C/F)
Travel time (one resetable and one non-resetable)
Engine hour meter
LCD adjustable backlight colour (3 levels of red, green, blue) comes on with ignition
Analogue scale backlight switched independently from LCD
Clock shown in standby mode with ignition off
Adjustable wheel circumference for all types of wheels. Ssetting range 1-3999 mm
Compatible with cable drive / gearbox electric speed sensors and magnet pickups
Kilometers or miles
When new, and until odometer reaches 18 miles / 30km the odometer can be edited to enter reading from a previous speedometer
Water resistant, vibration and shockproof ( 8G vibration , shock 100G tested )
E- certified for ADR Cpompliance
ACE-IHY mounting bracket included
Cables harness tails to solder into the bike included
Bezel (top ring) 100mm outer diameter (plastic) / 95mm outer diameter (CNC)
Sleeve 95mm outer diameter
Total depth 47mm
Visible depth if panel mounted 10mm
Hole 85mm diameter for panel mounting
- Classic 85mm needle tachometer with digital LCD display for speedo and other features.
- LCD shows digital functions of speedometer, tachometer, maximum RPM and SPD, average speed, trip meter 1/2, odometer, riding time, total riding time, total hour meter, volt meter, temperature meter, volt meter and clock.
- Integrates 6 LED warning lamps with different symbols depending on model.
- Built-in RGB LED backlight, user can adjust his/her prefer backlight color.
- Backlight can be switched on independently.
- Fast processor so can connect to pulse type gearbox speed sensors.
- Allows end user to adjust odometer when the odometer is less than 30km / 18.6 miles.
- Universal wheel circumference setting range: 1-3999mm.
- CA-085 includes main unit, bracket, RPM sensing wire, speed sensor, fitting kits, wiring harness and sleeve of main unit.
- Excellent water resistant, anti-vibration structure and noise immunity design.
Power Input: 12VDC
Speed Sensor: No Contact Magnetic Sensor and reed switch
Tacho Input: CDI or Ignition-coil signal
Wheel Circumference setting: 1mm-3999mm (1mm increment)
Operation Temperature: -10C to 80C inner housing
Storage Temperature: -25C to 85C inner housing
85mm dia x 56mm deep.
Threaded body with rear fitting fastening ring in the manner of a VDO unit. The speed sensor can be mounted anywhere on the bike while the tacho lead can be hard wired or simply wrapped around the spark plug cable.
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other S3 Performance Pty Ltd users shop smarter by writing reviews for products you have purchased.